The Fender Tone Master Deluxe Reverb is a triumph of modern digital processing, specifically crafted for the player who loves the '65 chime but is finished with the physical toll of vintage gear. By utilizing a high-performance processor to map the complex behavior of the original 22W tube signal path, this 100-watt digital engine replicates the headroom, touch-sensitivity, and harmonic "sag" that defined an era.
The result is a 1x12 combo that delivers the same sonic authority as its predecessor while weighing an unbelievable 23 lbs—nearly half the weight of the traditional reissue.
The 2026 Gigging Standard
Scalable Output: A rear-panel 5-way attenuator lets you downscale the power from stage volume to a whisper-quiet 0.2 watts. This ensures you can achieve "soaked" power-tube saturation without disturbing the neighbors.
Stage-Ready Direct Out: Skip the microphone hassle. The balanced XLR output includes two curated Impulse Response (IR) simulations, sending the sound of a perfectly mic'd speaker cabinet directly to the front-of-house or your recording software.
Touring-Grade Reliability: Say goodbye to fragile glass and heavy transformers. With no tubes to bias or maintain, this amp offers a consistent, "zero-warm-up" performance every single time you power it up.
More than just a simulator, the Tone Master is a meticulous digital rebuild of a legendary gain stage. Housed in a resonant solid pine cabinet and loaded with a Jensen® N-12K neodymium speaker, it provides the perfect intersection of vintage soul and 2026 portability.
Specs:
Amplifier Type: Digital Modeling (Deluxe Tube Amp Emulation)
Output Power: 100W (Simulates 22W Tube Performance)
Power Attenuation: 6-Way Selectable (0.2W, 0.3W, 1W, 5W, 12W, 22W)
Channels: 2 (Normal and Vibrato)
Speaker: 1 x 12" Jensen® N-12K NeodymiumEQ: 2-Band (Treble, Bass per Channel)
Effects: Digital Reverb, TremoloInputs: 2 x 1/4" (Normal), 2 x 1/4" (Vibrato)
Outputs: 1 x XLR (Balanced Line Out with Level and Ground Lift)
Cabinet Material: Lightweight Solid Pine
Exterior Covering: Black Textured Vinyl with Silver Grille Cloth
USB: 1 x USB Micro-B (Firmware Upgrades)
I/O: 1 x 1/4" (Channel, Reverb)
Footswitch Included: Yes (2-Button Footswitch)
Power Source: Standard IEC AC Cable
The Fender Tone Master Deluxe Reverb is a triumph of modern digital processing, specifically crafted for the player who loves the '65 chime but is finished with the physical toll of vintage gear. By utilizing a high-performance processor to map the complex behavior of the original 22W tube signal path, this 100-watt digital engine replicates the headroom, touch-sensitivity, and harmonic "sag" that defined an era.
The result is a 1x12 combo that delivers the same sonic authority as its predecessor while weighing an unbelievable 23 lbs—nearly half the weight of the traditional reissue.
The 2026 Gigging Standard
Scalable Output: A rear-panel 5-way attenuator lets you downscale the power from stage volume to a whisper-quiet 0.2 watts. This ensures you can achieve "soaked" power-tube saturation without disturbing the neighbors.
Stage-Ready Direct Out: Skip the microphone hassle. The balanced XLR output includes two curated Impulse Response (IR) simulations, sending the sound of a perfectly mic'd speaker cabinet directly to the front-of-house or your recording software.
Touring-Grade Reliability: Say goodbye to fragile glass and heavy transformers. With no tubes to bias or maintain, this amp offers a consistent, "zero-warm-up" performance every single time you power it up.
More than just a simulator, the Tone Master is a meticulous digital rebuild of a legendary gain stage. Housed in a resonant solid pine cabinet and loaded with a Jensen® N-12K neodymium speaker, it provides the perfect intersection of vintage soul and 2026 portability.
Specs:
Amplifier Type: Digital Modeling (Deluxe Tube Amp Emulation)
Output Power: 100W (Simulates 22W Tube Performance)
Power Attenuation: 6-Way Selectable (0.2W, 0.3W, 1W, 5W, 12W, 22W)
Channels: 2 (Normal and Vibrato)
Speaker: 1 x 12" Jensen® N-12K NeodymiumEQ: 2-Band (Treble, Bass per Channel)
Effects: Digital Reverb, TremoloInputs: 2 x 1/4" (Normal), 2 x 1/4" (Vibrato)
Outputs: 1 x XLR (Balanced Line Out with Level and Ground Lift)
Cabinet Material: Lightweight Solid Pine
Exterior Covering: Black Textured Vinyl with Silver Grille Cloth
USB: 1 x USB Micro-B (Firmware Upgrades)
I/O: 1 x 1/4" (Channel, Reverb)
Footswitch Included: Yes (2-Button Footswitch)
Power Source: Standard IEC AC Cable
Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
